PAC SWI-RC Steering Wheel Control Interface
PAC SWI-RC Steering Wheel Control Interface
- Retains steering wheel control functions when replacing the factory radio
- Retains programming even if the vehicle's battery is disconnected
- Control functions such as volume, mode and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor and Visteon radios equipped with a wired remote control input
- Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5.
- Clarion model CZ500 does not support remote Bluetooth controls
- Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer.
- Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT, X930BT, X940BT will support the Voice Recognition function via wired remote input.
PAC SWI-RC Steering Wheel Control Interface
PAC SWI-RC Steering Wheel Control Interface
| Brand | PAC |
|---|---|
| Model | SWI-RC |
| Item Weight | 1.1 pounds |
| Product Dimensions | 1.9 x 2.6 x 0.8 inches |
| Item model number | SWI-RC |
| Batteries | 1 12V batteries required. |
| Exterior | Smooth |
| Manufacturer Part Number | SWI-RC |
| Folding | No |
| Cover Included | Receiver^Harness^Manuel |
PAC SWI-RC Steering Wheel Control Interface
PAC Steering Wheel Control Interface
Product Features
-Steering Wheel Control Interface.
-For Alpine, JVC, Clarion, Kenwood, Pioneer, Sony, Valor, -OEM, Boyo, Dual, Visteon, Advent & Blaupunkt Radios.
-Control functions such as volume, mode and track.
-Radios must be equipped with a wired remote control input.
-Retains steering wheel control functions when replacing the factory radio.
-Retains programming even if the vehicle's battery is disconnected.
PAC SWI-RC Steering Wheel Control Interface
What's in the Box:
-Owner's manual.-Steering wheel control interface module (with attached 9" blue/yellow. -wire and 34" cable terminated by a right-angle male 3.5mm connector).
-24" Wiring harness.
-Packet of 8 resistors (includes 47 ohms/100 ohms/150 ohms/560 ohms/1000 ohms/1500 ohms/3900 ohms/5100 ohms).
-0.47uF Capacitor.
-Installation Instructions.
-2 Vehicle Connector Charts.
-Bluetooth Commands note.
-WORK LESS! note.
-Technical Support contact information.
PAC SWI-RC Steering Wheel Control Interface


No comments:
Post a Comment